'cable float switch'

The Cable Float Level Switch is a structured by using either micro switches, proximity switches or reed switches to control the contact. It's user-friendly design is ideal for level measurement. The switches will transmit an ON or OFF contact signal output when the float rises and turns upwards.

NRG GLOBAL is Manufacturer, Supplier and Exporter of Cable Float Switch, based in VADODARA, Gujarat,India.Protection Level: IP 65,67Max. Current: 10 Ampere (amp)Max. Voltage: 250 Volt (V)Product Type: Sensor Additional Information: Production Capacity: 500 Delivery Time: EX STOCK Packaging Details: EXPORT WORTHY PACKING

NRG GLOBAL INSTRUMENTS MAKE magnetically float operated Top Mounted Level Switch for controlling one or multi Levels by using reed Switch. The Unit Consists of Vertical Guide Pipe (Stem), Reed Switches Are located, Magnetic Float Sliding over the Stem according to the level in the tank. After passing the float, the reed relay will retain their output state. Various materials of construction are available depending up on Service Condition. Maximum 4 Set points can be given in a Single Level Switch & Maximum stem length will be 3 Meters. 2. Technical Data Float : S.S.316 / SS with PTFE / Poly Propylene Process Connection : Flanged / Screwed / TC Joint Flange : Mini 1” NB to Any Size in C.S. / S.S.304 / S.S.316 / SS with PTFE Coated / P.P. Switch : Hermetically Sealed Magnetically Operated Reed Switch with Rhodium Contact SPST / SPDT. Rating : 0.5 Amps @ 24 V DC OR 230 VAC 1 AMP Switch Housing : Die Cast Aluminum, Weather Proof IP 65 (Enclosure) / Flame Proof to II A, II B (IS – 2148 CMRS Dhanbad Approved) Operating Pressure : 10 Kg / Cm2 Operating Temp : Max. 90 C. Cable Entry : ½” NPT (F) OR ¾” ET (F) No of Switches : As Per Customer Requirement Stem Length : Up to 3 Meters.. other on your request Additional Information: Production Capacity: 100 Delivery Time: WEEK Packaging Details: EXPORT WORTHY PACKING

NRG GLOBAL MAKE side-mounted float level switch is suitable for liquid level control of open or bearing pressure container in industrial process. When the liquid level reaches to high or low limit, relay contact point can be as signal alarm device or the switch in electronic pump circuit. It is used in water treatment, petrochemical, furnace, shipyard etc. It is widely applicable in the condition of high viscosity, high pressure, high temperature because of it is flexible structure, and it can replace the UQK series products. Working principle To use of liquid buoyancy principle. When the floating ball due to buoyancy and moving up and down, the magnetic reed switch in the junction box will be action when it is influence by the arm end magnetic. The same principle is used in the micro switch device. To use of magnets and magnet micro switch arm end of mutual exclusion movement to push the micro switch action. Product purpose SM series float level switch is suitable for liquid level control of open or bearing pressure container in industrial process. When the liquid level reaches to high or low limit, relay contact point can be as signal alarm device or the switch in electronic pump circuit. Specification Application : Liquids Liquid Density : Above 0.5 – 2.0 Liquid Velocity : Upto 500 cp Design Pressure : Upto 40 Kg/cm² Design Temp : Upto 300°C Connection : Flanged to ASA/BS/DIN Screwed BSP/Screwed NPT Material : SS304/SS304L/SS316/SS316L/PP/HDPE/PVC/PVDF Lined/PTFE Lined Other Materials on request Switch Type : Micro, SDPT, DPDT Form : 1 NO+1NC / 2NO+2NC Rating : 5 Amp, 230 VAC OR 24 VDC Enclosure : W-Proof IP65 / Ex-Proof Additional Information: Production Capacity: 100 Delivery Time: WEEK Packaging Details: EXPORT WORTHY PACKING

1. Product Description NRG GLOBAL Introduced magnetically float operated Top Mounted Level Switch for controlling one or multi Levels by using reed Switch. The Unit Consists of Vertical Guide Pipe (Stem), Reed Switches Are located, Magnetic Float Sliding over the Stem according to the level in the tank. After passing the float, the reed relay will retain their output state. Various materials of construction are available depending up on Service Condition. Maximum 4 Set points can be given in a Single Level Switch & Maximum stem length will be 3 Meters. 2. Technical Data Float : S.S.316 / SS with PTFE / Poly Propylene Process Connection : Flanged / Screwed / TC Joint Flange : Mini 1” NB to Any Size in C.S. / S.S.304 / S.S.316 / SS with PTFE Coated / P.P. Switch : Hermetically Sealed Magnetically Operated Reed Switch with Rhodium Contact SPST / SPDT. Rating : 0.5 Amps @ 24 V DC Switch Housing : Die Cast Aluminum, Weather Proof IP 65 (Enclosure) / Flame Proof to II A, II B (IS – 2148 CMRS Dhanbad Approved) Operating Pressure : 10 Kg / Cm2 Operating Temp : Max. 90 C. Cable Entry : ½” NPT (F) OR ¾” ET (F) No of Switches : As Per Customer Requirement Stem Length : Up to 3 Meters 3. Design features 1. One Moving Component Exists, so that no – wear of float. 2. Suitable for any fluid having Specific Gravity Above 0.7 3. Minimum possible Distance between 2 Level set Points is 75 mm. 4. Accuracy : ± 0.10%, ± 0.25 %, ± 0.5 % on F.S. 5. The switch operates on the principle of magnetic flux coupling with no mechanical connection so that fluid contamination of switch components cannot occur. 4. Ordering Information Information Required to Quote: Material of Construction, Service Medium, Specific Gravity, Max. Pressure & Temperature, Number of Actuating Levels & Their Distance from top of the Connection, Process Connection.

NRG GLOBAL MAKE side-mounted float level switch is suitable for liquid level control of open or bearing pressure container in industrial process. When the liquid level reaches to high or low limit, relay contact point can be as signal alarm device or the switch in electronic pump circuit. It is used in water treatment, petrochemical, furnace, shipyard etc. It is widely applicable in the condition of high viscosity, high pressure, high temperature because of it is flexible structure, and it can replace the UQK series products. Working principle To use of liquid buoyancy principle. When the floating ball due to buoyancy and moving up and down, the magnetic reed switch in the junction box will be action when it is influence by the arm end magnetic. The same principle is used in the micro switch device. To use of magnets and magnet micro switch arm end of mutual exclusion movement to push the micro switch action. Product purpose SM series float level switch is suitable for liquid level control of open or bearing pressure container in industrial process. When the liquid level reaches to high or low limit, relay contact point can be as signal alarm device or the switch in electronic pump circuit.

MAKE : NRG GLOBAL HSN CODE : 90261020 TYPE : TOP MOUNTED FLOAT TYPE NAME OF THE FLUID : LIQUID Temperature : 100 deg C Pressure : VACCUME TO 5 kg/cm2 g Sp Gr / Density : 0.3 – 2.0 Viscosity : 0.7-10 Cp WETTED PARTS (MOC) : SS304 FLOAT : 2 NOS SS316 OF 28 MM DIA FLOAT STOPPER : SS304 STEM PIPE : SS304 OF 8 MM dia SIZE : ½” BSP m CONNECTION MOC : SS304 screwed end ENCLOSURE / HOUSING : NA SWITCH : Glass encapsulated Hermetically Sealed Reed Contact SWITCH CONTACT : NO TO NC POTENTIAL FREE CONATCT 24 VDC CABLE ENRTY : NA STEM LENGTH : 165 MM HIGH LEVEL FROM TOP : 105 MM LOW LEVEL FROM TOP : 140 MM ACCESSORIES : NA QTY : 1 NOS

MAKE : NRG GLOBAL HSN CODE : 90261020 TYPE : SIDE MOUNTED FLOAT TYPE NAME OF THE FLUID : LIQUID Temperature : 150 deg C Pressure : VACCUME TO 10 kg/cm2 g Sp Gr / Density : 0.3 – 2.0 Viscosity : 0.7-10 Cp WETTED PARTS (MOC) : SS 304 FLOAT : 1 NOS SS304 OF 40 MM DIA FLOAT ROD : SS304 WITH MAGNET INSERTED FLANGE : SS304 SIZE : 1.5” ASA 150 # RF ENCLOSURE / HOUSING : ALUMINIUM DIE CAST WEATHER PROOF SWITCH : IMPORTED MICRO SWITCH SWITCH CONTACT : NC+NO+ COM POTENTIAL FREE CONATCT 230 VAC 3 AMP CABLE ENRTY : ½” BSP-F STEM LENGTH : 200 MM ACCESSORIES : NA

MAKE : NRG GLOBAL HSN CODE : 90261020 TYPE : MAGETIC FLOAT TYPE NAME OF THE FLUID : LIQUID Temperature : Max 100 deg C Pressure : 2-3 kg/cm2 Sp Gr / Density : 0.3 – 2.0 Viscosity : 0.7-10 Cp WETTED PARTS (MOC) : SS 304 FLOAT : 2 NOS SS 304 OF 28 MM DIA FLOAT STOPPER : SS 304 STEM PIPE : SS 316 OF 8 MM dia CONNECTION SIZE : 1” ASA 150 # RF CONNECTION MOC : SS 304 FLANGE ENCLOSURE / HOUSING : ALLUMINIUM DIE CAST WEATHERPROOF SWITCH : IMPORTED REED SWITCH SWITCH CONTACT : NO TO NC POTENTIAL FREE CONATCT 24 VDC CABLE ENTRY : ½” ET STEM LENGTH : 500 MM HIGH LEVEL FROM TOP : 200 MM