'ss304 bsp m stop plug accessoires'

MAKE : NRG GLOBAL MODEL : TUBULAR SIDE MOUNTED TYPE : WITH VALVE FLUID : LIQUID TEMPERATURE : 150O C PRESSURE : VACCUME TO 6 Kg/Cm2 SPECIFIC GRAVITY / DENSITY : 0.7-1.2 VISCOSITY (OP / MAX) : 1 Cp WETTED PARTS (MOC) : SS 304 CONNECTION FLANGE : SS 304 SLIP ON TYPE CASING / GLASS PROTECTION : SS304 “C” TYPE CHANNEL HAVING 1 MM THICK GLASS TUBE : GLASS TUBE OF 19 MM OD SCALE : SS304 ENGRAVED OF 25 MM WIDTH WITH LC 5MM PACKING : 100 % PTFE GLAND : SS304 VALVE TYPE : SS304 INBUILT ISOLATION NEEDLE VALVE VALVE BODY : SS304 VENT PLUG : ½” BSP STOP PLUG DRAIN PLUG : ½” BSP STOP PLUG ACCESSOIRES : N. A. HYD TEST : 7 Kg/cm2 to Vacuum FASTENERS : SS304 CONNECTION SIZE : 1” ASA 150 # RF

MAKE : NRG GLOBAL MODEL : TUBULAR SIDE MOUNTED TYPE : WITHOUT ISOLATION VALVE FLUID : LIQUID TEMPERATURE : 50O C SPECIFIC GRAVITY / DENSITY : 0.7-1.2 VISCOSITY (OP / MAX) : 1 Cp WETTED PARTS (MOC) : MS CONNECTION FLANGE : MS SLIP ON TYPE CASING / GLASS PROTECTION: MS “C” TYPE CHANNEL OF 1 MM THICK WITH POWDER COATED TUBE : BOROSILICATE TRANSPARENT GLASS TUBE of 25 MM OD SCALE : ACRYLIC ENGRAVED OF 25 MM WIDTH WITH LC 5MM PACKING : 100 % PTFE GLAND PUSHER : PTFE VALVE TYPE : NA VALVE BODY : NA VENT PLUG : ½” MS BSP Stop Plug DRAIN PLUG : ½” MS BSP Stop Plug ACCESSOIRES : NA HYD TEST : 7 Kg/cm2 to Vacuum FASTENERS : SS304

MAKE : NRG GLOBAL TYPE : MAGNETIC FLAPPER DEISGN MODEL : SIDE MOUNTED NAME OF THE FLUID : ACIDIC LIQUID STATE OF THE FLUID : LIQUID ONLY FLUID TYPE : TRANSPARENT / OPAQUE TEMPRATURE : 50 DEG C PRESSURE : 5 KG/CM2 SPECIFIC GRAVITY : 1.3 VISCOSITY ( OP / MAX) : 1-20 CP WETTED PARTS : P.P MAIN CHAMBER : P.P 2” NB SS304 SCH 10 PIPE FLOAT : P.P MAGNETIC PROCESS CONNECTION : P.P FLANGE CONNECTION SIZE : 2” ASA 150 # RF TYPE OF INDICATOR : RED & WHITE COLOUR ROTATING FLAPPER DESIGN GLASS TUBE : NA PACKING : 100% PTFE SCALE : ACRYLIC ENGRAVED LEAST COUNT : 5 MM INDICATOR HOUSING PROTECTION : ALUMINIUM POWDER COATED AIR VENT : 1/2” P.P BSP-M STOP PLUG DRAIN : 1/2” P.P BSP-M STOP PLUG FASTNERS : SS304 ACCURACY : 2% FSR LEVEL TRANSMITTER : EXTERNAL MOUNTED LEVEL TRANSMITTER OUT PUT 4-20 mA LEVEL SWITCH

NRG make SIDE MOUNTED MAGNETIC LEVEL INDIATOR HSN CODE : 90261020 MAKE : NRG GLOBAL MODEL NO : NRG/SMMLI/SS/25/CC TYPE : BIO COLOUR MAGNETIC ROLLER DEISGN MODEL : SIDE MOUNTED NAME OF THE FLUID : LIQUID STATE OF THE FLUID : LIQUID ONLY TEMPRATURE : 150 DEG C PRESSURE : 10 BAR SPECIFIC GRAVITY : 0.8 – 1.8 VISCOSITY ( OP / MAX) : 1 CP WETTED PARTS : SS316 MAIN CHAMBER : SS316 2” SCH 80 PIPE FLOAT : SS316 PROCESS CONNECTION : SS316 FLANGE END CONNECTION SIZE : 1” ASA 150 # RF TYPE OF INDICATOR : RED & WHITE COLOUR ROTATING ROLLER DESIGN GLASS TUBE : NA PACKING : 100% PTFE SCALE : SS316 ENGRAVED HAVING LC 5 MM LEAST COUNT : 5 MM INDICATOR HOUSING PROTECTION : ALUMINIUM POWDER COATED AIR VENT : ½” NPT STOP PLUG DRAIN : SS316 BLINED FLANGE WITH SS316 ½” BSP STOP PLUG PROTECTION : IP 65 MOUNTING ORIENTATION : SIDE – SIDE FASTNERS : SS304 HYD TEST : 10 KG/CM2

MAKE : NRG GLOBAL MODEL : TUBULAR SIDE MOUNTED TYPE : WITHOUT ISOLATION VALVE FLUID : LIQUID TEMPERATURE : 150O C SPECIFIC GRAVITY / DENSITY : 0.7-1.2 VISCOSITY (OP / MAX) : 1 Cp WETTED PARTS (MOC) : SS304 CONNECTION FLANGE : MS SLIP ON TYPE CASING / GLASS PROTECTION: MS “C” TYPE CHANNEL OF 1 MM THICK TUBE : BOROSILICATE TRANSPARENT GLASS TUBE of 19 MM OD SCALE : ACRYLIC1 ENGRAVED OF 25 MM WIDTH WITH LC 5MM PACKING : 100 % PTFE GLAND PUSHER : PTFE VALVE TYPE : NA VALVE BODY : NA VENT PLUG : ½” SS304 BSP-M Stop Plug DRAIN PLUG : ½” SS304 BSP-M Stop Plug ACCESSOIRES : NA HYD TEST : 7 Kg/cm2 to Vacuum FASTENERS : SS304

MAKE : NRG GLOBAL HSN CODE : 90261020 TYPE : TOP MOUNTED FLOAT TYPE NAME OF THE FLUID : LIQUID Temperature : 100 deg C Pressure : VACCUME TO 5 kg/cm2 g Sp Gr / Density : 0.3 – 2.0 Viscosity : 0.7-10 Cp WETTED PARTS (MOC) : SS304 FLOAT : 2 NOS SS316 OF 28 MM DIA FLOAT STOPPER : SS304 STEM PIPE : SS304 OF 8 MM dia SIZE : ½” BSP m CONNECTION MOC : SS304 screwed end ENCLOSURE / HOUSING : NA SWITCH : Glass encapsulated Hermetically Sealed Reed Contact SWITCH CONTACT : NO TO NC POTENTIAL FREE CONATCT 24 VDC CABLE ENRTY : NA STEM LENGTH : 165 MM HIGH LEVEL FROM TOP : 105 MM LOW LEVEL FROM TOP : 140 MM ACCESSORIES : NA QTY : 1 NOS

NRG GLOBAL MAKE side-mounted float level switch is suitable for liquid level control of open or bearing pressure container in industrial process. When the liquid level reaches to high or low limit, relay contact point can be as signal alarm device or the switch in electronic pump circuit. It is used in water treatment, petrochemical, furnace, shipyard etc. It is widely applicable in the condition of high viscosity, high pressure, high temperature because of it is flexible structure, and it can replace the UQK series products. Working principle To use of liquid buoyancy principle. When the floating ball due to buoyancy and moving up and down, the magnetic reed switch in the junction box will be action when it is influence by the arm end magnetic. The same principle is used in the micro switch device. To use of magnets and magnet micro switch arm end of mutual exclusion movement to push the micro switch action. Product purpose SM series float level switch is suitable for liquid level control of open or bearing pressure container in industrial process. When the liquid level reaches to high or low limit, relay contact point can be as signal alarm device or the switch in electronic pump circuit. Specification Application : Liquids Liquid Density : Above 0.5 – 2.0 Liquid Velocity : Upto 500 cp Design Pressure : Upto 40 Kg/cm² Design Temp : Upto 300°C Connection : Flanged to ASA/BS/DIN Screwed BSP/Screwed NPT Material : SS304/SS304L/SS316/SS316L/PP/HDPE/PVC/PVDF Lined/PTFE Lined Other Materials on request Switch Type : Micro, SDPT, DPDT Form : 1 NO+1NC / 2NO+2NC Rating : 5 Amp, 230 VAC OR 24 VDC Enclosure : W-Proof IP65 / Ex-Proof Additional Information: Production Capacity: 100 Delivery Time: WEEK Packaging Details: EXPORT WORTHY PACKING

MAKE : NRG GLOBAL TYPE : MAGNETIC FLAPPER DEISGN MODEL : SIDE MOUNTED NAME OF THE FLUID : ORGANICS LIQUID STATE OF THE FLUID : LIQUID ONLY FLUID TYPE : TRANSPARENT / OPAQUE TEMPRATURE : 150 DEG C PRESSURE : VACCUME TO 10 KG/CM2 SPECIFIC GRAVITY : 0.79, 0.87 , 1.0, 0.90, 0.88 , 1.60 VISCOSITY ( OP / MAX) : 0.7 – 10 CP WETTED PARTS : SS316 L MAIN CHAMBER : SS316 L 2” NB SEAMLESS PIPE SCH 10 PIPE FLOAT : SS316 L MAGNETIC PROCESS CONNECTION : SS316 LFLANGE CONNECTION SIZE : DN 25 ANSI B16.5 CLASS 150 # RF TYPE OF INDICATOR : RED & WHITE COLOUR ROTATING FLAPPER DESIGN GLASS TUBE : NA PACKING : 100% PTFE SCALE : ACRYLIC ENGRAVED LEAST COUNT : 5 MM INDICATOR HOUSING PROTECTION : SS304 AIR VENT : SS316 L 1.5” BLINED FLANGE WITH 3/4” NPT-M STOP PLUG DRAIN : SS316 L 1.5” BLINED FLANGE WITH 3/4” NPT-M STOP PLUG FASTNERS : SS304 ACCURACY : 2% FSR

NRG GLOBAL MAKE Displacer type level switches offers the industrial user a wide choice of alarm and control configuration. DLS works on a simple buoyancy principle and is well suited for simple or complex applications, such as forming surging liquids or agitated fluids, and usually costs less than other types of level switches. CONSTRUCTION & OPERATION Operation is based on simple buoyancy principle. As the liquid level rises and progressively immerses the displacer elements, the effective weight suspended on the spring reduces and the consequent length of the spring change is used to provide magnet movement and operate the switch. The spring movement causes the magnetic sleeve to attract a pivoted magnet actuating a switch mechanism located outside the barrier tube. Built-in limit stops, prevent over stroking under level surge conditions. FEATURES: • Wide choice of switching functions • Suitable for large tanks up to 15 meters • Site adjustable switch points • Customized for high temp, high pressure & vaccum applications. • Reliable performance in turbulent liquids even without still pipes. • Easy transportation of longer length switches. • Enclosure : Weather proof-IP-65 Ex-proof-Gr. IIA & IIB or IIC GENERAL SPECIFICATIONS: Enclosure : Cast ALUMINIUM, Weather Proof-IP 65, Cast AL Ex-proof Gr. IIA & IIB or IIC Conduit Connection : ¾ ” ET or ½” NPT Measuring Range : 200 mm~15000 mm Operating Differential : 40±5 mm / Adjustable / 65 ±5 mm Switch Type : Micro switch Switch Contacts : 2 SPDT (2 NO + 2 NC) @ 5A, 230 VAC (Resistive) Switch Action : Bistable Terminals : To suit 1.5 mm2 conductor Flexible Rope : SS304, SS316, PP, PTFE Displacer : SS304, SS316, PP, PTFE Spring Housing : SS316, PP, PTFE Spring Material : SS316, SS316L Process Connection Flanged : MS, SS304, SS316, PP (SS clad), PTFE (SS clad) Perforated still well : MS, SS304, SS316, PP (65 NB) External Cage : MS, SS304, SS316, PP (80 NB) Max. Temperature : 0-200°C (without cooling fins) 0-300°C (with cooling fins) (Contact factory for temperature more than 300°C) Max. Test Pressure : Vaccum to 40 Kg/cm2 (Contact factory for pressure more than 40 Kg/cm2) Min. Sp. Gravity : 0.7 (Contact factory for Sp. Gr. less than 0.7)