'na valve body'

NRG GLOBAL MAKE all plastic fittings to eliminate corrosion completely. The meters are useful for measuring flow of air, common gases, water and many organic chemicals, excluding petrolelum products. Applications include purging of gas lines, anaesthesia, laboratory instruments, leak detection, cable pressurization, industrial furnaces and chromatography etcThe essential working part is a tapered flow tube precision machined inside the acrylic body. When flow occurs, the position of a float within the tube indicates flowrate on a calibrated scale engraved on the acrylic body. With integral construction, a needle valve and flow parts (Model FSA & FSB) are built into the acrylic body, resulting in a very compact and ecnomical design. The unique "front plate" design (Model FSB) the beauty of any panel where the meter is installed.

MAKE : NRG GLOBAL HSN CODE : 90261020 TYPE : GLASS TUBE ROTAMETER Name of the Fluid : LDO Temperature : 40 - 55 Deg C Pressure : 8 BAR Specific Gravity / Density : 0.267 Viscosity : PL SPECIFY M. RANGE : 0-150 Lit/Hr MOC (WETTEC PARTS) : SS 304 End Connection : SS 304 FLANGED END Process Connection : 1/2” ASA 150 # RF Float Material : SS 304 Float Retainer : PP Tube Material : GERMAN TAPER BOROSILICATE GLASS TUBE Packing/O-Ring Material : PTFE GLAND : CS BODY / COVER : MS POWDER COATED Scale : ACRYLIC ENGRAVED Scale Length : 50 – 150 mm Approx. Rangebility : 10:1 Scale Marking : In LPH Accuracy : ±2% F.S.D. Inlet Conn. Orientation : BOTTOM Outlet Conn. Orientation : TOP FASTNERS : S.S.304 F/F HIEGHT : 500 MM

MAKE : NRG GLOBAL MODEL : TUBULAR SIDE MOUNTED TYPE : WITHOUT ISOLATION VALVE FLUID : LIQUID TEMPERATURE : 50O C SPECIFIC GRAVITY / DENSITY : 0.7-1.2 VISCOSITY (OP / MAX) : 1 Cp WETTED PARTS (MOC) : MS CONNECTION FLANGE : MS SLIP ON TYPE CASING / GLASS PROTECTION: MS “C” TYPE CHANNEL OF 1 MM THICK WITH POWDER COATED TUBE : BOROSILICATE TRANSPARENT GLASS TUBE of 25 MM OD SCALE : ACRYLIC ENGRAVED OF 25 MM WIDTH WITH LC 5MM PACKING : 100 % PTFE GLAND PUSHER : PTFE VALVE TYPE : NA VALVE BODY : NA VENT PLUG : ½” MS BSP Stop Plug DRAIN PLUG : ½” MS BSP Stop Plug ACCESSOIRES : NA HYD TEST : 7 Kg/cm2 to Vacuum FASTENERS : SS304

NRG GLOBAL INSTRUMENTS MAKE PURGE GLASS TUBE ROTAMETERSalient Features · Economical · Compact · Panel/Side Mounting · Good Accuracy · Ease of Maintenance APPLICATIONS · Accurate Level Measurement · Purging for corrosive fluids · Continuous Lubrication (Bearings) · Density Measurement · Gas Analysers (Sample Delivery) · Fluid : An transparent liquids and gases · Maximum Pressure : 12 Kg/cm3 · Maximum Temperature : 100°C · Flow Rate : Upto 300 LPM for Air & 5 LPM for Water Standard (Higher flow rates on request) · Accuracy : 5% FSD Std (other on request) · Connections (Inlet & Outlet) : ⅛*,¼*½*NPT & BSP Standard, (Other sizes and flanged connections on request) MATERIAL · Material Tube : Borosilicate Glass · Body of Rotameter : 304SS / 316SS/Brass Plated / Carbon Steel plated · Body of DP Regulator : Die Cast Aluminum / 304 SS / 316 SS (Others on request) · Connections : 304 SS / 316 SS /Brass plated · Inter connecting Tube for Rotameter and DP regulator : 304SS / 316SS / Copper plated · Needle valve : 304 / 316SS · Packing : Teflon / neoprene

MAKE : NRG GLOBAL HSN CODE : 90261020 TYPE : ACRYLIC BODY ROTAMETER Name of the Fluid : WATER Temperature : 40 DEG C Pressure : 2-3 KG/CM2 Specific Gravity / Density : 1.0 Viscosity : 1.0 CP M. RANGE : 0 – 10000 LPH MOC (WETTEC PARTS) : P.P End Connection : P.P FLANGE END Process Connection : 2” ASA 150 # RF Float Material : SS304 Float Retainer : P.P Tube Material : ACRYLIC Packing/O-Ring Material : NEOPREN RUBBER GLAND : NA BODY / COVER : SOLID TRANSPARENT ACRYLIC BLOCK Scale : DIRECT ENGRAVED ON BODY Scale Length : 50 – 250 mm Approx. Rangebility : 10:1 Scale Marking : In LPH Accuracy : ±2% F.S.D. Inlet Conn. Orientation : BOTTOM Outlet Conn. Orientation : TOP F/F HIEGHT : 500 MM

We are successfully ranked as the top manufacturer and supplier of Acrylic Body Rotameter. It is mainly used for water / salt water, air, nitrogen, hydrogen and natural gas. The acrylic body integral machined cut in acrylic body from imported transparent acrylic blocks sheets. The offered rota meter is accessible in different models, sizes and stipulation to meet the various requirements of the customers. In addition to this, our professionals are capable to modified this rota meter within the stipulation time frame and at affordable rates. The mentioned prices are approx price & it may vary as per your requirement because it requires customization in product.

MAKE : NRG GLOBAL MODEL : TUBULAR SIDE MOUNTED TYPE : WITHOUT ISOLATION VALVE FLUID : LIQUID TEMPERATURE : 150O C SPECIFIC GRAVITY / DENSITY : 0.7-1.2 VISCOSITY (OP / MAX) : 1 Cp WETTED PARTS (MOC) : SS304 CONNECTION FLANGE : MS SLIP ON TYPE CASING / GLASS PROTECTION: MS “C” TYPE CHANNEL OF 1 MM THICK TUBE : BOROSILICATE TRANSPARENT GLASS TUBE of 19 MM OD SCALE : ACRYLIC1 ENGRAVED OF 25 MM WIDTH WITH LC 5MM PACKING : 100 % PTFE GLAND PUSHER : PTFE VALVE TYPE : NA VALVE BODY : NA VENT PLUG : ½” SS304 BSP-M Stop Plug DRAIN PLUG : ½” SS304 BSP-M Stop Plug ACCESSOIRES : NA HYD TEST : 7 Kg/cm2 to Vacuum FASTENERS : SS304

NRG GLOBAL MAKE air header distribution manifold has greater volume capacity that assists in handling fluctuation in air compressors. The air compressor header also provides a guaranteed full penetration weld. Coded weld and standard non-destructive tests are performed on these headers to check on the properties possessed by them. Festo air distribution manifold has 8 outlets that eliminate the need for complex multiple piping. High Pressure Air Header operates with 2 supply lines one of which is sealed with a blank plug to avoid damage when not in use. It is made up of die-cast aluminum which provides it the ability to resist corrosion and is light in weight. 6 way air header is used in the plastic processing, petrochemical industry, power generation, refineries, and chemical industries. 4 way air headers are said to be reliable and have a weldable body structure. They reduce the assembly and installation time. Air Header Manifold With Needle Valve has flang and threaded inlet options. Air Header With Flange End can be further coated with zinc depending upon the requirement of the customer. Air Header With Ball Valve is used in shipping and marine, oil and gas, and various other industries

NRG GLOBAL MAKE pioneer of high-performance Thermoplastics like PTFE, FEP, PFA lined products. They are lead producers and manufacturers of PFA Lined Ball Valves. Additional Information: Production Capacity: 100 Delivery Time: 10 DAYS Packaging Details: EXPORT WORTHY PACKING