'white colour rotating roller design glass tube'

NRG make SIDE MOUNTED MAGNETIC LEVEL INDIATOR HSN CODE : 90261020 MAKE : NRG GLOBAL MODEL NO : NRG/SMMLI/SS/25/CC TYPE : BIO COLOUR MAGNETIC ROLLER DEISGN MODEL : SIDE MOUNTED NAME OF THE FLUID : LIQUID STATE OF THE FLUID : LIQUID ONLY TEMPRATURE : 150 DEG C PRESSURE : 10 BAR SPECIFIC GRAVITY : 0.8 – 1.8 VISCOSITY ( OP / MAX) : 1 CP WETTED PARTS : SS316 MAIN CHAMBER : SS316 2” SCH 80 PIPE FLOAT : SS316 PROCESS CONNECTION : SS316 FLANGE END CONNECTION SIZE : 1” ASA 150 # RF TYPE OF INDICATOR : RED & WHITE COLOUR ROTATING ROLLER DESIGN GLASS TUBE : NA PACKING : 100% PTFE SCALE : SS316 ENGRAVED HAVING LC 5 MM LEAST COUNT : 5 MM INDICATOR HOUSING PROTECTION : ALUMINIUM POWDER COATED AIR VENT : ½” NPT STOP PLUG DRAIN : SS316 BLINED FLANGE WITH SS316 ½” BSP STOP PLUG PROTECTION : IP 65 MOUNTING ORIENTATION : SIDE – SIDE FASTNERS : SS304 HYD TEST : 10 KG/CM2

MAKE : NRG GLOBAL TYPE : MAGNETIC FLAPPER DEISGN MODEL : SIDE MOUNTED NAME OF THE FLUID : ORGANICS LIQUID STATE OF THE FLUID : LIQUID ONLY FLUID TYPE : TRANSPARENT / OPAQUE TEMPRATURE : 150 DEG C PRESSURE : VACCUME TO 10 KG/CM2 SPECIFIC GRAVITY : 0.79, 0.87 , 1.0, 0.90, 0.88 , 1.60 VISCOSITY ( OP / MAX) : 0.7 – 10 CP WETTED PARTS : SS316 L MAIN CHAMBER : SS316 L 2” NB SEAMLESS PIPE SCH 10 PIPE FLOAT : SS316 L MAGNETIC PROCESS CONNECTION : SS316 LFLANGE CONNECTION SIZE : DN 25 ANSI B16.5 CLASS 150 # RF TYPE OF INDICATOR : RED & WHITE COLOUR ROTATING FLAPPER DESIGN GLASS TUBE : NA PACKING : 100% PTFE SCALE : ACRYLIC ENGRAVED LEAST COUNT : 5 MM INDICATOR HOUSING PROTECTION : SS304 AIR VENT : SS316 L 1.5” BLINED FLANGE WITH 3/4” NPT-M STOP PLUG DRAIN : SS316 L 1.5” BLINED FLANGE WITH 3/4” NPT-M STOP PLUG FASTNERS : SS304 ACCURACY : 2% FSR

MAKE : NRG GLOBAL TYPE : MAGNETIC FLAPPER DEISGN MODEL : SIDE MOUNTED NAME OF THE FLUID : ACIDIC LIQUID STATE OF THE FLUID : LIQUID ONLY FLUID TYPE : TRANSPARENT / OPAQUE TEMPRATURE : 50 DEG C PRESSURE : 5 KG/CM2 SPECIFIC GRAVITY : 1.3 VISCOSITY ( OP / MAX) : 1-20 CP WETTED PARTS : P.P MAIN CHAMBER : P.P 2” NB SS304 SCH 10 PIPE FLOAT : P.P MAGNETIC PROCESS CONNECTION : P.P FLANGE CONNECTION SIZE : 2” ASA 150 # RF TYPE OF INDICATOR : RED & WHITE COLOUR ROTATING FLAPPER DESIGN GLASS TUBE : NA PACKING : 100% PTFE SCALE : ACRYLIC ENGRAVED LEAST COUNT : 5 MM INDICATOR HOUSING PROTECTION : ALUMINIUM POWDER COATED AIR VENT : 1/2” P.P BSP-M STOP PLUG DRAIN : 1/2” P.P BSP-M STOP PLUG FASTNERS : SS304 ACCURACY : 2% FSR LEVEL TRANSMITTER : EXTERNAL MOUNTED LEVEL TRANSMITTER OUT PUT 4-20 mA LEVEL SWITCH

“NRG GLOBAL” make Magnetic Level Gauge provides clear, high clarity indication of liquid level. Magnetic Level Gauges are principally designed as an alternative to glass level gauges. NRG GLOBAL offers Magnetic Level Gauges in top-bottom, top and side mounted construction with two types of indicator system i.e. Capsule and Bi-colour Rollers. Magnetic Level Gauge is consists of three major components: Float Chamber, Float and Indicator System. Magnetic Level Gauge operates on the principle of magnetic field coupling to provide Fluid Level Information. Float chamber is typically constructed with nonmagnetic pipe having process Connections that matches to the vessel connections. Float size and weight is determined by the process fluid, pressure, temperature and the specific gravity of the process fluid. Float contains magnets to provide 360 ̊magnetic flux field.

“NRG” Make Metal Variable Area Type Flow Meter are designed to measure flow rate of liquids and gases under critical conditions. It consists of a tapered metal tube, an indicating assembly and float. A magnet encapsulated in float couples with rotating magnets are connected to an indicating pointer. Henceforth, the movement of the float is accurately indicated in terms of flowrate. They are intended for application where high pressure, temperature or corrosive conditions preclude the use of conventional glass tube. These are all Metal Variable Area Type Flow meter design to measure flow rate of Liquids & Gases under critical conditions. It consists of a tapered metal tube, an indicating assembly and a float. A magnet encapsulates in float couples with rotating magnets connected to an indicating pointer, thus the movement of the float, is accurately indicated in terms of flow rate. 2. Working Principle When fluid or gas flows through a taper tube containing a float, a pressure difference of P1 and P2 is created between upper and lower side of the float. The float moves upwards by a force obtained by multiplying the pressure differential by the maximum cross-sectional area of the float. Additional Information: Item Code: MTRM009 Production Capacity: 100 Delivery Time: WEEK Packaging Details: EXPORT WORTHY PACKING

NRG GLOBAL MAKE Metal Variable Area Type Flow Meter are designed to measure flow rate of liquids and gases under critical conditions. It consists of a tapered metal tube, an indicating assembly and float. A magnet encapsulated in float couples with rotating magnets are connected to an indicating pointer. Henceforth, the movement of the float is accurately indicated in terms of flowrate. They are intended for application where high pressure, temperature or corrosive conditions preclude the use of conventional glass tube. These are all Metal Variable Area Type Flow meter design to measure flow rate of Liquids & Gases under critical conditions. It consists of a tapered metal tube, an indicating assembly and a float. A magnet encapsulates in float couples with rotating magnets connected to an indicating pointer, thus the movement of the float, is accurately indicated in terms of flow rate. 2. Working Principle When fluid or gas flows through a taper tube containing a float, a pressure difference of P1 and P2 is created between upper and lower side of the float. The float moves upwards by a force obtained by multiplying the pressure differential by the maximum cross-sectional area of the float. Based on Bemoulli's theorem, the principle mentioned above can be theoretically expressed as follows. Due to taper tube, as the float moves upwards, the fluid passing area increases as a result of which the differential pressure decreases. Upward movement of float stops when the dead load is dynamically balanced by the differential pressure. Tapering of metering tube is so designed that the vertical movement of the float becomes linearly proportional to the rate of flow and the scale is provided to read the position of the float, thusgiving birth to flow rate indication.

Metal Variable Area Type Flow Meter are designed to measure flow rate of liquids and gases under critical conditions. It consists of a tapered metal tube, an indicating assembly and float. A magnet encapsulated in float couples with rotating magnets are connected to an indicating pointer. Henceforth, the movement of the float is accurately indicated in terms of flowrate. They are intended for application where high pressure, temperature or corrosive conditions preclude the use of conventional glass tube. These are all Metal Variable Area Type Flow meter design to measure flow rate of Liquids & Gases under critical conditions. It consists of a tapered metal tube, an indicating assembly and a float. A magnet encapsulates in float couples with rotating magnets connected to an indicating pointer, thus the movement of the float, is accurately indicated in terms of flow rate. 2. Working Principle When fluid or gas flows through a taper tube containing a float, a pressure difference of P1 and P2 is created between upper and lower side of the float. The float moves upwards by a force obtained by multiplying the pressure differential by the maximum cross-sectional area of the float. Based on Bemoulli's theorem, the principle mentioned above can be theoretically expressed as follows. Due to taper tube, as the float moves upwards, the fluid passing area increases as a result of which the differential pressure decreases. Upward movement of float stops when the dead load is dynamically balanced by the differential pressure. Tapering of metering tube is so designed that the vertical movement of the float becomes linearly proportional to the rate of flow and the scale is provided to read the position of the float, thus giving birth to flow rate indication. 3. Specifications Accuracy : ± 2% of FSD Rangeability : 10:1 Repeatability : ± 0.5% Temperature Rating : -200 to 250°C Pressure Rating : 40 Bar Flow Direction : Bottom to Top Connections : Flanged, TC End and Screwed Enclosure : IP 65 Weatherproof 4. Design features 1. Simplified piping and reduced space requirements 2. Permanent magnetic link between metering float and motion position transmitter 3. Precision swaged metering tube 4. Guide cartridges easily removable for cleaning 5. Provide with Electrical transmitter, flow indicator or alarm 6. Available F/F Height in 350, 450, 500 mm 7. Available Flange size 15 NB to 150 NB & Flow 200 LPH to 50,000 LPH

Metal Variable Area Type Flow Meter are designed to measure flow rate of liquids and gases undercritical conditions. It consists of a tapered metal tube, an indicating assembly and float. A magnetencapsulated in float couples with rotating magnets are connected to an indicating pointer. Henceforth,the movement of the float is accurately indicated in terms of flowrate.They are intended for application where high pressure, temperature or corrosive conditions precludethe use of conventional glass tube. These are all Metal Variable Area Type Flow meter design to measureflow rate of Liquids & Gases under critical conditions. It consists of a tapered metal tube, an indicatingassembly and a float. A magnet encapsulates in float couples with rotating magnets connected to anindicating pointer, thus the movement of the float, is accurately indicated in terms of flow rate.2. Working PrincipleWhen fluid or gas flows through a taper tube containing a float, a pressure difference of P1 and P2 iscreated between upper and lower side of the float. The float moves upwards by a force obtained bymultiplying the pressure differential by the maximum cross-sectional area of the float.Based on Bemoulli's theorem, the principle mentioned above can be theoretically expressed asfollows. Due to taper tube, as the float moves upwards, the fluid passing area increases as a result of which thedifferential pressure decreases. Upward movement of float stops when the dead load is dynamically balanced by the differential pressure. Tapering of metering tube is so designed that the vertical movement of the float becomes linearly proportional to the rate of flow and the scale is provided to read the position of the float, thusgiving birth to flow rate indication.

“NRG GLOBAL” make Magnetic Level Gauge provides clear, high clarity indication of liquid level. Magnetic Level Gauges are principally designed as an alternative to glass level gauges. NRG GLOBAL offers Magnetic Level Gauges in top-bottom, top and side mounted construction with two types of indicator system i.e. Capsule and Bi-colour Rollers. Magnetic Level Gauge is consists of three major components: Float Chamber, Float and Indicator System. Magnetic Level Gauge operates on the principle of magnetic field coupling to provide Fluid Level Information. Float chamber is typically constructed with nonmagnetic pipe having process Connections that matches to the vessel connections. Float size and weight is determined by the process fluid, pressure, temperature and the specific gravity of the process fluid. Float contains magnets to provide 360 ̊magnetic flux field. DESIGN FUTURE: Indicator system is consists of bi-colour rollers equipped with magnets mounted on rail inside the housing. As the level starts rising or falling magnetic float also travels with liquid level in non magnetic chamber. The magnetic interaction between magnets in float and bi-colour rollers causes each roller to rotate 180 ̊. We are providing high & low Level Switch adjustable.