'multiple chambers'

NRG GLOBAL MAKE Basket strainers are installed to protect equipment from damage caused by unwanted debris that may be in the pipeline. The unwanted debris could be dirt or other foreign particles that make their way into the process fluid. Typically, basket strainers are installed in horizontal pipelines and in situations where high flow capacity is required. These strainers are installed upstream of equipment like pumps, control valves, and traps, keeping potentially corrosive or damaging debris from making its way down the line. They can be installed alone or in a series to increase filtration. They may come with a single chamber (simplex strainers) or multiple chambers (multiplex strainers). To read more about the differences between simplex and duplex strainers, check out this post. Understanding Mesh Sizing Each strainer is designed with a mesh lined basket to filter and collect the unwanted debris. Mesh size should be chosen based on the job function, not the size of the system. Selecting a mesh with openings that are too small could result in more frequent clogged lines, while a mesh with significantly larger openings could permit more unwanted debris to flow through the pipeline and equipment. Ideally, then, you’ll want to choose a mesh where the perforation is slightly smaller than the smallest particle you’ll need to filter out. Mesh size is measured by the number of openings in one linear inch of screen. For instance, a 16-mesh screen would have 16 openings per inch, while a 100-mesh screen would have 100 openings. Higher numbers, therefore, are able to strain out smaller particles with a finer weave. The baskets are typically made of stainless steel for quality and durability. Factors for Selecting the Right Basket Strainer Each application could require a different basket strainer. Consider the unique functions of your pipeline before deciding on a strainer. Important factors include the pressure and temperature requirements of your line, the type of liquid flow (corrosive, abrasive, etc.), debris size, and the frequency of cleaning and maintenance. You may also consider a duplex style basket strainer (such as these), which holds two strainer baskets fed by diverting valves. This system allows one basket to be cleaned and serviced while the other maintains flow.

Conductivity Level Switch is a simple, low cost, point level measurement switch designed for level detection of conductive liquids having low densities, high viscosities, containing solid particles and to detect interface between non-conductive and conductive liquids. The probes work through the variation of the electrical resistance between the reference electrode and the level-control electrode. Conductivity level switches detect the level resistance when their electrodes are covered by the medium. If the tank is made of plastic, concrete, or any other nonconductive material, an additional electrode is required as a reference Conductivity Level Switches are available with stainless steel 316 electrodes as standard Suitable for many chemicals and aggressive media which are conductive in nature and dirty liquids, liquids with high solid content Construction available with both Solid probes & Suspended probes to suit fitting requirement It is a simple, low cost, point level controller designed for detecton of conductive liquids, having low densites, high viscosities, containing solid particles and interface between nonconductive and conductive liquids. CONSTRUCTION & OPERATION It comprises of a probe, wired to a level controller. The probe holds one common reference/common electrode and one or multiple “Control Electrodes” depending upon the number of levels to be controlled. All the electrodes are suitably insulated to avoid electrical bridging. The lengths of “Control Electrodes” correspond to the height of preset level points to be controlled and the length of the “reference/common Electrode” is kept slightly longer than the longest “Control Electrode”. If tank is conductive, it can be used as a reference/common electrode. Then number of control electrodes equals number of preset levels. Level controller houses sensing electronics consisting of power supply and signal conditoning circuit which provide a “Low AC Voltage” across mass and control electrodes. On liquid reaching preset level point electrical circuit gets completed - generating a signal which is amplified to actuate a relay, those potential free contacts are available for subsequent operations. On “Level Falling” the circuit breaks, deactivating the relay Additional Information: Production Capacity: 100 Delivery Time: WEEK Packaging Details: EXPORT WORTHY PAKING

NRG MAKE Reflex & Transparent Type Level Indicator : We are one of the foremost manufacturers and suppliers of a comprehensive assortment of Reflex & Transparent Type Level Indicator. Our range is appreciated for higher degree of accuracy, precision & compact design, durability and longer service life. Reflex Type: Reflex Type Level Indicator will have one side reflex glass and cover plate with slotted window, it is very robust & reliable & used for direct indication of the liquid. It is suitable for high pressure & temperature. MOC - CS/A 105/SS -304/ SS 316 Range - 300 MM - 2500 MM (in Multiple Segments) Class - Indian / Imported, Toughened, option - 1) Anti frost for low Temperature application. Heating Jacket Isolation valve Additional Information: Delivery Time: 15 DAYS Packaging Details: EXPORT WORTHY PACKING

NRG GLOBAL MAKE air header distribution manifold has greater volume capacity that assists in handling fluctuation in air compressors. The air compressor header also provides a guaranteed full penetration weld. Coded weld and standard non-destructive tests are performed on these headers to check on the properties possessed by them. Festo air distribution manifold has 8 outlets that eliminate the need for complex multiple piping. High Pressure Air Header operates with 2 supply lines one of which is sealed with a blank plug to avoid damage when not in use. It is made up of die-cast aluminum which provides it the ability to resist corrosion and is light in weight. 6 way air header is used in the plastic processing, petrochemical industry, power generation, refineries, and chemical industries. 4 way air headers are said to be reliable and have a weldable body structure. They reduce the assembly and installation time. Air Header Manifold With Needle Valve has flang and threaded inlet options. Air Header With Flange End can be further coated with zinc depending upon the requirement of the customer. Air Header With Ball Valve is used in shipping and marine, oil and gas, and various other industries